======Power Matrix======
>>{{{toc}}}>>

Service: apcupsd, apcaccess
Version: 13.14.13
Attached Equipment: Smart-UPS 3000
Connection Type: USB to Chickostick
Configuration: Master/Slave
Network Port: TCP 3551
=====Installation=====
||Server||Version||Installation Method||
||Chickostick||13.14.12 redhat||yum||
||Poprocks||13.14.13-1.fc21||yum||
||Mallo||13.14.10||/usr/ports/sysutils/apcupsd||
||Pez||13.14.8-2||apt-get||
||Kitkat||3.14.8-2||apt-get||
||Nerds||3.14.10p0||pkg_add||
====Server Specific Notes====
||Server||Notes||
||Chickostick||iptables configured to allow TCP port 3551, chkconfig apcupsd on and chkconfig --list to verify startup||
||Poprocks||chkconfig does not work out of box, used 'systemctl enable apcupsd'||
||Mallo||startup services setup by installer||
||Pez||/etc/default/apcupsd set ISCONFIGURED=yes||
||Kitkat||/etc/default/apcupsd set ISCONFIGURED=yes||
||Nerds||Download of packages http://www.filewatcher.com/d/OpenBSD/5.1/i386/apcupsd-3.14.10p0.tgz.274168.html
saved tgz to /export/it/applications
used pkg_add apcupsd-3.14.10p0.tgz on nerds
service is launched using /usr/local/sbin/apcupsctl [start|stop|restart]||
====Configurations Files====
%%/etc/apcupsd/apcupsd.conf%%
<< **Master Server**
UPSNAME mtups1
UPSCABLE usb
USPTYPE usb
DEVICE
UPSCLASS standalone
UPSMODE disable
BATTERYLEVEL 5
MINUTES 10<<
<< **Slave Servers**
UPSNAME mtups1
UPSCABLE ether
USPTYPE net
DEVICE 192.168.255.45
POLLTIME 60
BATTERYLEVEL 50
MINUTES 3<<::c:: 
=====Notes=====
**Verifying Device Detection and Driver**
To make sure that your USB subsystem can see the UPS, just do this from a shell prompt:
%%cat /proc/bus/usb/devices%%
**Verified Drivers**
%%ls -l /sys/bus/usb/drivers/%%
**Check Status of Service**
%%apcaccess status%%
**Configuration File**
<<chickostick /etc/apcupsd/apcupsd.conf<<::c::

=====Attachments=====
{{files}}

======Power Outage======
Generac Generator Rated for 250A at 200V (5000W)
||Device||Peak Power||Normal Power||
||Chicko||750W||350W||
||Poprocks||1000W||500W||
||Kitkat||750W||300W||
||Peeps||1000W||300W||
||HP 1810 Switch||4.8W||4W||
||Demarcation Equipment||30W||30W||
||Nerds||60W||30W||
||KVM||20W||20W||
||Server Monitor||80W||80W||
||Light in Server Room||40W||40W||
||Intern Isle Switch||4W||4W||

Peak power usage leaves 741.2W remaining
Normal power usage leaves 3082W remaining

Each WS uses a workgroup switch, monitor and workstation.
Peak power usage: 129W (8 Workstations)
Normal power usage: 92W (38 Workstations)

We could also have a few lights going as we use compact florescent.

Total workstations is a theoretical max, but during the winter we have adequate power for all employees as long as we ensure that all kitchen appliances, heaters, printers, and any device not being used exclusively for work is not connected to power outlets in the back and middle offices.

----
CategoryITDoc