Revision history for PowerMatrix


Revision [18510]

Last edited on 2016-10-14 10:57:21 by ShaneCourtney

No Differences

Revision [18509]

Edited on 2016-10-14 10:56:53 by ShaneCourtney
Additions:
======Power Outage======
Deletions:
=+====Power Outage=====+

Revision [18508]

Edited on 2016-10-14 10:56:18 by ShaneCourtney
Additions:
=+====Power Outage=====+
Deletions:
=====Power Outage=====

Revision [18507]

Edited on 2016-10-14 10:55:53 by ShaneCourtney
Additions:
We could also have a few lights going as we use compact florescent.
Total workstations is a theoretical max, but during the winter we have adequate power for all employees as long as we ensure that all kitchen appliances, heaters, printers, and any device not being used exclusively for work is not connected to power outlets in the back and middle offices.
Deletions:
We could also have a few lights going as we use compact flourensent

Revision [18506]

Edited on 2016-10-14 10:50:17 by ShaneCourtney
Additions:
Generac Generator Rated for 250A at 200V (5000W)
Peak power usage: 129W (8 Workstations)
Normal power usage: 92W (38 Workstations)
We could also have a few lights going as we use compact flourensent
Deletions:
Generac Generator Rated for 250A at 200V (4500W)
Peak power usage: 129W (6 Workstations)
Normal power usage: 92W (33 Workstations)

Revision [18505]

Edited on 2016-10-14 10:41:23 by ShaneCourtney
Additions:
=====Power Outage=====
Generac Generator Rated for 250A at 200V (4500W)
||Device||Peak Power||Normal Power||
||Chicko||750W||350W||
||Poprocks||1000W||500W||
||Kitkat||750W||300W||
||Peeps||1000W||300W||
||HP 1810 Switch||4.8W||4W||
||Demarcation Equipment||30W||30W||
||Nerds||60W||30W||
||KVM||20W||20W||
||Server Monitor||80W||80W||
||Light in Server Room||40W||40W||
||Intern Isle Switch||4W||4W||
Peak power usage leaves 741.2W remaining
Normal power usage leaves 3082W remaining
Each WS uses a workgroup switch, monitor and workstation.
Peak power usage: 129W (6 Workstations)
Normal power usage: 92W (33 Workstations)

Revision [17023]

Edited on 2015-11-24 10:58:30 by ShaneCourtney
Additions:
||Nerds||3.14.10p0||pkg_add||
Deletions:
||Nerds||||||

Revision [17022]

Edited on 2015-11-24 10:57:57 by ShaneCourtney
Additions:
used pkg_add apcupsd-3.14.10p0.tgz on nerds
service is launched using /usr/local/sbin/apcupsctl [start|stop|restart]||
Deletions:
used pkg_add apcupsd-3.14.10p0.tgz on nerds||

Revision [17021]

Edited on 2015-11-24 10:45:29 by ShaneCourtney
Additions:
||Nerds||Download of packages http://www.filewatcher.com/d/OpenBSD/5.1/i386/apcupsd-3.14.10p0.tgz.274168.html
saved tgz to /export/it/applications
used pkg_add apcupsd-3.14.10p0.tgz on nerds||
Deletions:
||Nerds||||

Revision [17020]

Edited on 2015-11-24 09:58:01 by ShaneCourtney
Additions:
||Kitkat||3.14.8-2||apt-get||
||Nerds||||||
||Chickostick||iptables configured to allow TCP port 3551, chkconfig apcupsd on and chkconfig --list to verify startup||
||Poprocks||chkconfig does not work out of box, used 'systemctl enable apcupsd'||
||Kitkat||/etc/default/apcupsd set ISCONFIGURED=yes||
||Nerds||||
Deletions:
||Chickostick||iptables configured to allow TCP port 3551||
||Poprocks||chkconfig does not work out of box, used 'systemctl enable apcusd'||
||Kitkat||||

Revision [17018]

Edited on 2015-11-24 08:26:26 by ShaneCourtney
Additions:
**Check Status of Service**
%%apcaccess status%%
Deletions:
<<T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=1
P: Vendor=051d ProdID=0003 Rev=1.06
S: Manufacturer=American Power Conversion
S: Product=Smart-UPS 3000 FW:UPS 09.2 / ID=18
S: SerialNumber=AS1509236933
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=20ms
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms<<::c::
<<drwxr-xr-x. 2 root root 0 Jun 22 16:54 hiddev
drwxr-xr-x. 2 root root 0 Jun 22 16:54 hub
drwxr-xr-x. 2 root root 0 Jun 29 18:02 usb
drwxr-xr-x. 2 root root 0 Jun 22 16:54 usbfs
drwxr-xr-x. 2 root root 0 Jun 29 18:02 usbhid<<::c::
UPSTYPE usb
#POLLTIME 60
LOCKFILE /var/lock
SCRIPTDIR /etc/apcupsd
PWRFAILDIR /etc/apcupsd
NOLOGINDIR /etc
ONBATTERYDELAY 6
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
#FACILITY DAEMON
#UPSNAME UPS_IDEN
# Battery date - 8 characters
#BATTDATE mm/dd/yy
#SENSITIVITY H
#WAKEUP 60
#SLEEP 180
#LOTRANSFER 208
#HITRANSFER 253
#RETURNCHARGE 15
#BEEPSTATE T
#LOWBATT 2
#OUTPUTVOLTS 230
#SELFTEST 336

Revision [16258]

Edited on 2015-07-07 10:23:58 by ShaneCourtney
Additions:
||Pez||/etc/default/apcupsd set ISCONFIGURED=yes||
Deletions:
||Pez||||

Revision [16246]

Edited on 2015-07-06 16:59:54 by ShaneCourtney
Additions:
Network Port: TCP 3551
====Server Specific Notes====
||Server||Notes||
||Chickostick||iptables configured to allow TCP port 3551||
||Poprocks||chkconfig does not work out of box, used 'systemctl enable apcusd'||
||Mallo||startup services setup by installer||
||Pez||||
||Kitkat||||

Revision [16240]

Edited on 2015-07-02 18:13:16 by MikeShultz [added to category]
Additions:
----
CategoryITDoc

Revision [16236]

Edited on 2015-07-01 14:29:55 by ShaneCourtney [added to category]
Additions:
USPTYPE usb
DEVICE
MINUTES 10<<
UPSCABLE ether
USPTYPE net
DEVICE 192.168.255.45
POLLTIME 60
BATTERYLEVEL 50
MINUTES 3<<::c::
Deletions:
UPSCABLE usb
USPTYPE usb
DEVICE
UPSCLASS standalone
UPSMODE disable<<
UPSCABLE ether
USPTYPE net
DEVICE 192.168.255.45
POLLTIME 60<<::c::

Revision [16235]

Edited on 2015-07-01 14:13:08 by ShaneCourtney [added to category]
Additions:
UPSMODE disable<<
Deletions:
UPSMODE disable<<::c::

Revision [16234]

Edited on 2015-07-01 14:12:42 by ShaneCourtney [added to category]
Additions:
=====Installation=====
||Server||Version||Installation Method||
||Chickostick||13.14.12 redhat||yum||
||Poprocks||13.14.13-1.fc21||yum||
||Mallo||13.14.10||/usr/ports/sysutils/apcupsd||
||Pez||13.14.8-2||apt-get||
====Configurations Files====
%%/etc/apcupsd/apcupsd.conf%%
<< **Master Server**
UPSCABLE usb
USPTYPE usb
DEVICE
UPSCLASS standalone
UPSMODE disable<<::c::
<< **Slave Servers**
UPSCABLE ether
USPTYPE net
DEVICE 192.168.255.45
POLLTIME 60<<::c::
=====Notes=====
%%ls -l /sys/bus/usb/drivers/%%
**Configuration File**
<<chickostick /etc/apcupsd/apcupsd.conf<<::c::
UPSNAME mtups1
UPSCABLE usb
UPSTYPE usb
#POLLTIME 60
LOCKFILE /var/lock
SCRIPTDIR /etc/apcupsd
PWRFAILDIR /etc/apcupsd
NOLOGINDIR /etc
ONBATTERYDELAY 6
BATTERYLEVEL 5
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS standalone
UPSMODE disable
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
#FACILITY DAEMON
#UPSNAME UPS_IDEN
# Battery date - 8 characters
#BATTDATE mm/dd/yy
#SENSITIVITY H
#WAKEUP 60
#SLEEP 180
#LOTRANSFER 208
#HITRANSFER 253
#RETURNCHARGE 15
#BEEPSTATE T
#LOWBATT 2
#OUTPUTVOLTS 230
#SELFTEST 336
=====Attachments=====
Deletions:
<<ls -l /sys/bus/usb/drivers/<<::c::
======Attachments======

Revision [16233]

Edited on 2015-07-01 11:20:17 by ShaneCourtney [added to category]
Additions:
%%cat /proc/bus/usb/devices%%
<<T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms<<::c::
Deletions:
<<cat /proc/bus/usb/devices<<
>>T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms>>::c::

Revision [16232]

Edited on 2015-07-01 11:19:38 by ShaneCourtney [added to category]
Additions:
<<cat /proc/bus/usb/devices<<
Deletions:
<<cat /proc/bus/usb/devices<<::c::

Revision [16231]

Edited on 2015-07-01 11:19:21 by ShaneCourtney [added to category]
Deletions:
chickostick returned value

Revision [16230]

Edited on 2015-07-01 11:18:42 by ShaneCourtney [added to category]
Additions:
>>T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms>>::c::
Deletions:
<<T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms<<::c::

Revision [16220]

Edited on 2015-06-30 13:56:27 by ShaneCourtney [added to category]
Additions:
Attached Equipment: Smart-UPS 3000
**Verified Drivers**
<<ls -l /sys/bus/usb/drivers/<<::c::
<<drwxr-xr-x. 2 root root 0 Jun 22 16:54 hiddev
drwxr-xr-x. 2 root root 0 Jun 22 16:54 hub
drwxr-xr-x. 2 root root 0 Jun 29 18:02 usb
drwxr-xr-x. 2 root root 0 Jun 22 16:54 usbfs
drwxr-xr-x. 2 root root 0 Jun 29 18:02 usbhid<<::c::
Deletions:
Attached Equipment: Smart-UPS

Revision [16219]

Edited on 2015-06-30 13:51:23 by ShaneCourtney [added to category]
Additions:
<<cat /proc/bus/usb/devices<<::c::
<<T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms<<::c::
Deletions:
<<
cat /proc/bus/usb/devices
<<::c::
<<
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms
<<::c::

Revision [16218]

Edited on 2015-06-30 13:50:55 by ShaneCourtney [added to category]
Additions:
**Verifying Device Detection and Driver**
To make sure that your USB subsystem can see the UPS, just do this from a shell prompt:
chickostick returned value

Revision [16217]

Edited on 2015-06-30 13:47:21 by ShaneCourtney [added to category]
Additions:
>>{{{toc}}}>>
Deletions:
>>{{toc}}>>

Revision [16216]

Edited on 2015-06-30 13:46:26 by ShaneCourtney [added to category]
Additions:
<<::c::

Revision [16215]

Edited on 2015-06-30 13:45:13 by ShaneCourtney [added to category]
Additions:
<<
cat /proc/bus/usb/devices
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms
<<
Deletions:
<<cat /proc/bus/usb/devices
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms<<

Revision [16214]

Edited on 2015-06-30 13:44:17 by ShaneCourtney [added to category]
Additions:
>>{{toc}}>>

Revision [16213]

Edited on 2015-06-30 13:43:37 by ShaneCourtney [added to category]
Additions:
======Attachments======
{{files}}
Deletions:
Documentation: {{files}}

Revision [16212]

Edited on 2015-06-30 13:35:13 by ShaneCourtney [added to category]
Additions:
Documentation: {{files}}

Revision [16211]

Edited on 2015-06-30 13:34:22 by ShaneCourtney [added to category]
Additions:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=2 Spd=12 MxCh=0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=1
P: Vendor=051d ProdID=0003 Rev=1.06
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA
Deletions:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=051d ProdID=0003 Rev= 1.06
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA

Revision [16210]

Edited on 2015-06-30 13:33:04 by ShaneCourtney [added to category]
Additions:
<<cat /proc/bus/usb/devices
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms<<
Deletions:
''cat /proc/bus/usb/devices
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms''

Revision [16209]

Edited on 2015-06-30 13:32:44 by ShaneCourtney [added to category]
Additions:
Attached Equipment: Smart-UPS
Configuration: Master/Slave
''cat /proc/bus/usb/devices
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=051d ProdID=0003 Rev= 1.06
S: Manufacturer=American Power Conversion
S: Product=Smart-UPS 3000 FW:UPS 09.2 / ID=18
S: SerialNumber=AS1509236933
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=20ms
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms''
Deletions:
Attached Equipment:

Revision [16205]

The oldest known version of this page was created on 2015-06-30 12:24:56 by ShaneCourtney [added to category]
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki